News

The high bay light is a lighting fixture with unique advantages for large buildings and indoor locations such as shopping centres, pavilions, stadiums, factories etc. Here are some of the advantages of high bay lighting.LED Panel Lights High Brightness The high bay light uses an LED light source which provides a high level of light. Although the high bay light has only one light source, it can illuminate an entire room. The high bay light has a good light utilisation rate, does not produce waste light and can illuminate the entire interior space.LED Flood Light Energy efficient How energy efficient are high bay lights? This is combined with the professional design and performance of the high bay light. The high bay light uses an LED light source, which is faster than other lamps and lanterns, with a millisecond response, getting rid of the waiting time for a cold start; due to the characteristics of the LED light source, the high bay light plays an energy-saving role, saving more energy than traditional lamps and lanterns at the same brightness.Flexible LED Strips Dimmable The high bay light can be dimmable, allowing the brightness of the light to be adjusted as required. This enables the high bay luminaire to be adapted to different scenarios and requirements, making it an ideal luminaire for venues such as exhibitions, stadiums, factories and professional cinemas. Long life span High bay luminaires use LED light sources with a typical life span of over 50,000 hours. Compared to traditional luminaires, high bay luminaires can be replaced less frequently, enabling high performance and brightness to be maintained over a long period of time. Good thermal performance The heat dissipation system of the high bay luminaire is relatively complete and can effectively reduce the temperature of the luminaire. The use of off-line feedback technology and heat dissipation structure ensures the long-term stable operation of the luminaire. Lightweight and durable The design language of the high bay light is simple and atmospheric, the shape is generous and beautiful, it can be installed directly on the overhead position at high altitude, the service life is long, and the construction is simple and light, which can reduce the use frequency of the lift and improve the construction efficiency. Overall, the high bay light is a very good lighting equipment for large buildings and indoor places, it can provide high quality lighting effect and has the advantages of energy saving, long life and dimmability.

As people's demand for lighting continues to improve, LED downlights, as an efficient, energy-saving and environmentally friendly lighting product, are gradually becoming a new favourite in the market. This article will analyse the future development trend of LED downlights from four aspects: market demand, technological innovation, industrial competition and application areas.LED Panel Lights Market demand: diversified and personalised needs coexist As urbanisation accelerates and people's living standards improve, the trend towards diversification and personalisation of lighting needs is increasingly evident. In the future, as consumers' demand for lighting continues to improve, the LED downlight market will show a trend of diversification and personalised demand co-existing.LED Down Light Technological innovation: light efficiency and safety go hand in hand LED downlight technology continues to innovate, with light efficiency and safety becoming the focus of attention. With the continuous technological breakthroughs, the luminous efficiency of LED downlights will gradually improve, bringing higher lighting effects to users. At the same time, safety will also become an important direction for LED downlight technology innovation. In the future, LED downlights will pay more attention to the selection and control of light sources to ensure the safety of users in the process of use.Flexible LED Strips Industry competition: the best and the worst, differentiated competition With the expansion of LED downlight market demand and the improvement of technology level, the market competition is becoming increasingly fierce. The competition pattern of each link of the industry chain will gradually become clear, and the elimination of the fittest will become the main theme of market development. Application areas: expand to more fields, green smart city construction is the direction With the acceleration of urbanisation and the improvement of people's living standards, the city's requirements for green and smart city construction are getting higher and higher. LED downlights will be widely used in the fields of building interior lighting, road lighting and square lighting under this trend. At the same time, LED downlights will also be expanded to indoor lighting, landscape lighting and other fields, bringing users a more comfortable, safe and energy-saving lighting experience. In summary: LED downlight as a high-efficiency, energy-saving, environmentally friendly lighting products, the future development prospects are broad. In terms of market demand diversification and personalisation, technological innovation, industrial competition and application areas, LED downlights will show a more favorable development trend. With the promotion of green and intelligent city construction, LED downlights will have a wider application space in the future.

Flexible LED strip, also known as flexible LED light strip, is a kind of LED light made by using flexible circuit board as substrate. It has the features of flexibility, bendability, energy saving, environmental protection, etc. It usually consists of LED beads, PCB circuit board, chip capacitors, resistors, control IC, glue, etc. It can be cut to any length as needed and is generally powered by 12V or 24V DC power supply.LED Panel Lights Flexible LED strip has many application scenarios, such as home interior lighting, commercial display, car decoration, billboard design, stage performance, etc. Because of its characteristics such as flexibility and bendability, it can be deformed and spliced according to different curved surfaces to achieve a variety of shapes and designs, and has great application prospects in various aspects.LED Down Light The installation and maintenance of flexible LED strip is also relatively easy and simple. It can be fixed to walls, ceilings or furniture surfaces with glue or double-sided tape, and can also be installed in a magnetic way. At the same time, flexible LED strips are energy-efficient, environmentally friendly and have a long life span, which can significantly reduce energy consumption and CO2 emissions and have a very positive effect on protecting the environment.Flexible LED Strips

LED lights are a very energy-efficient and environmentally friendly lighting equipment, which has obvious advantages over traditional light sources such as incandescent and fluorescent lamps.LED Panel Lights First of all, LED lights have a high energy conversion efficiency, usually can reach more than 90%, more than 30% energy saving than traditional incandescent, fluorescent lamps and other traditional light sources, with significant energy-saving effect.LED Down Light Second, LED lights also have a very low power consumption, usually only about 1/10 of the traditional light source, the service life is also much longer than the traditional light source, generally can reach more than 50,000 hours, while the service life of traditional light sources is usually only about 1000 hours.Flexible LED Strips In addition, LED lights also have a good environmental performance, because it does not produce harmful ultraviolet and infrared, will not produce harmful gases and dust, and will not produce electromagnetic interference, human health and environmental safety have no impact. Finally, LED lights also have a good reliability, because it will not be as easy as the traditional light source of electromagnetic interference from the outside world, not easy to be destroyed, the service life is also very long. Therefore, compared with traditional light sources, LED lights have high energy conversion efficiency, very low power consumption, good environmental performance and good reliability, which is a very excellent lighting equipment.

LED linear light is an outdoor lighting fixture with LED beads as the light source and linear tubes as the housing. Compared with traditional street lights, it has higher energy efficiency, longer life and better environmental adaptability. At the same time, its linear shape can flexibly adapt to different environmental needs, and the assembly is also more convenient and fast.LED Panel Lights LED linear lights have many advantages, which we will introduce one by one below. First of all, the energy efficiency of LED linear lights is higher than that of traditional street lights. LED lamp beads have high efficiency, low consumption and long life, which is the reason why LED lamps are widely used. Compared with traditional street lights, LED linear lights are much more energy efficient, and they can use less electricity to emit more light and make the road brighter. Moreover, the life of LED lamp beads is several times longer than traditional lamp beads, which can effectively reduce the frequency of lamp bead replacement and save costs.LED Down Light Secondly, the environmental performance of LED linear lights is much better. Traditional street lights use high-pressure sodium lamps, this kind of lamps and lanterns in the use of the process will produce a certain amount of ultraviolet and electromagnetic radiation, on the environment and human health have a certain degree of harm. And LED lamps and lanterns not only do not have these problems, and compared to traditional street lights can also be better protection of the environment.Flexible LED Strips Again, the LED linear lights are more resistant to interference. The working principle of LED lamp beads is different from traditional lamp beads, it uses electronic components to emit light, so it will not be interfered by electromagnetic waves and voltage and other factors, and it works stably and reliably. Especially in the harsh environment, LED linear lights can work better and more stable, will not easily fail, to ensure the normal use of street lights. Finally, the design of LED linear lights is more ornamental. LED linear lights are composed of multiple linear tubes, which can be combined according to actual needs to form different combinations of shapes, and the lights can be set to pure white, blue-white and yellow colors, which is more ornamental than traditional street lights. To sum up, LED linear lights have many advantages and characteristics, and its application is becoming more and more widespread. Whether in city roads, highways or municipal projects, LED linear lights can play a very good role. At the same time, with the continuous improvement of technology, the function and performance of LED linear lights will also have a lot of room for improvement.

Due to the continuous updating of lighting technology, LED linear lights have become one of the important components of modern lighting. LED linear lights are widely used in lighting, and are also decorative and beautiful, therefore, they are loved by many people. This paper will elaborate on the definition, structure, characteristics, application and future development of LED linear lights.LED Panel Lights I. Definition of LED linear lights LED linear lights, as the name suggests, is the use of LED light-emitting diodes as a light source, the shape of the linear device. LED linear lights are different from traditional light sources (such as incandescent and fluorescent lamps, etc.), its light source is energy-efficient LED lamp beads. LED linear lights due to its simple structure, high brightness, soft light, small size, long life and other advantages, so it has been widely attention and application. LED linear lights are widely used because of their simple structure, high brightness, soft light, long life, etc.LED Down Light Second, the structure of LED linear lights The structure of LED linear light is mainly composed of two parts, namely the shell and the internal structure. The shell is generally made of aluminum, plastic or glass, its role is to protect the lamp beads, but also can play a role in heat dissipation. The internal structure is mainly composed of LED beads, heat sinks, circuit boards and other parts. Due to the high brightness of LED beads, its heat generation is also correspondingly large. Therefore, in the design of LED linear lights, the importance of the heat sink can not be ignored. The circuit board is mainly used to control the brightness and color of LED beads to meet different lighting needs.Flexible LED Strips Third, the characteristics of LED linear lights 1, low energy consumption: LED linear lamp power consumption is more energy efficient compared to traditional light sources, so in the same brightness, its energy consumption is lower. 2, soft light: LED linear lamp light synthesis by multiple LED lamp beads, so the light is softer, can effectively avoid the problem of visual fatigue. 3, no radiation: because the LED linear lamp uses LED beads as the light source, so its light does not contain ultraviolet light and other radiation harmful to the eyes. 4, long service life: most of the traditional light source life is a few thousand hours, while the service life of LED linear lights can reach tens of thousands of hours, more long life. 5, color variety: due to the use of circuit board control, LED linear lights can produce a variety of colors of light, you can choose according to different practical needs. Fourth, the application of LED linear lights 1.Commercial lighting: LED linear light's soft light and high brightness make it widely used in commercial lighting, such as shopping malls, hotels, exhibition halls and other places. 2, indoor lighting: because of the small size of LED linear lights, beautiful, with a high decorative effect, so in the family indoor lighting can be used linear lights to increase the beauty of space. 3, outdoor lighting: some public places and street lights can also use LED linear lights instead of traditional incandescent and fluorescent lamps, with better energy efficiency ratio and stability. 4, art lighting: LED linear light color diversity and soft light, so that it has been widely used in art lighting, such as stage, cinema, exhibition, camera, etc.. Five, the future development of LED linear lights With the continuous updating of lighting technology, LED linear lights in the future development will also gradually cater to more market demand. In the future, LED linear lights will have more innovation and development in energy-saving technology, environmental technology, intelligent control, etc., and will be applied in more fields to meet people's pursuit of efficient lighting and good life. In short, LED linear light has many advantages, which is the reason why it is widely concerned and applied. In the future, LED linear lights will have more innovations in energy saving, environmental protection and intelligence, and their application scenes will be more and more extensive.

LED panel light is a high-grade indoor lighting fixture, its outer frame is made of aluminum alloy by anodic oxidation, the light source is LED, the whole lamp design is beautiful and simple, atmospheric luxury, both good lighting effect, but also can bring people the feeling of beauty. LED panel light design is unique, light through the high light transmission rate of the light guide plate to form a uniform plane luminous effect, good uniformity of illumination, soft light, comfortable and not lose bright, can effectively relieve eye fatigue. LED panel light can also be anti-radiation, will not stimulate the skin of pregnant women, the elderly, children.LED Down Light Installation form 1.Can be embedded in the ceiling, wall and the surface of the installation body;Flexible LED Strips 2.It can be hung on the ceiling or under the installation body. When set on the white ceiling, the entire ceiling is one color, very beautiful, neat and coordinated; 3, LED panel light with wide frequency voltage design (AC85-240V/50-60Hz), can be used in all countries in the world; high power LED using isolated power supply, constant current or constant voltage drive, high power efficiency, no pollution to the grid, stable performance, safe and reliable;LED Flood Light 4, LED panel light is similar to the LCD TV backlight technology of a new surface light source, soft light, beautiful appearance, has been widely favored by European and American businessmen, a large number of foreign investors are seeking good quality, good service, good price panel light products and suppliers;

LED light uses I. LED is small in size LED is basically a very small chip encapsulated in epoxy resin, so it is very small and very light. Second, LED power consumption is low LED Down Light LED lighting fixtures consume quite low power, generally speaking, the working voltage of LED is 2-3.6 V. The working current is 0.02-0.03 A. This means: it consumes no more than 0.1 W of electricity.LED Linear Light Third, the LED long service life Under the proper current and voltage, the service life of LED can reach 100,000 hours. Fourth, high brightness, low heat LED light-emitting diode manufacturers, LED use cold light-emitting technology, heat generation is much lower than ordinary lighting fixtures. Five, environmental protection LED is made of non-toxic materials, unlike fluorescent lamps containing mercury will cause pollution, while LED can also be recycled and reused. Sixth, strong and durable LED lighting fixtures are completely encapsulated in epoxy resin, which is stronger than light bulbs and fluorescent tubes. There are no loose parts inside the lamp, these features make LED lighting fixtures can be said to be not easy to damage. High energy saving: energy saving energy without pollution that is environmentally friendly. DC drive, ultra-low power consumption (single tube 0.03-0.06 watts) electric and optical power conversion close to 100%, the same lighting effect than the traditional light source energy saving more than 80%. Long life: LED light source some people call it a long-life light, meaning that the light never goes out. Solid cold light source, epoxy resin package, there is no loose part of the lamp body, there is no filament luminescence easy to burn, thermal deposition, light decay and other shortcomings, the service life of up to 60,000 to 100,000 hours, more than 10 times longer than the life of traditional light sources. Variable: LED light source can use the principle of red, green, blue three primary colors, under the control of computer technology to make three colors with 256 levels of gray and arbitrary mixing, you can produce 256 × 256 × 256 = 16777216 colors, the formation of different combinations of light colors change endlessly, to achieve a variety of dynamic changes in the effect and a variety of images. Environmental protection: better environmental benefits, no ultraviolet and infrared light in the spectrum, neither heat, nor radiation, glare is small, and waste can be recycled, no pollution does not contain mercury, cold light source, can be safe to touch, belonging to the typical green lighting source. High-tech: compared with the traditional light source monotonous luminous effect, LED light source is a low-voltage microelectronic products, the successful integration of computer technology, network communication technology, image processing technology, embedded control technology, etc., so it is also digital information products, is a semiconductor optoelectronic devices, "high-tech" technology, with online programming, unlimited upgrades It is flexible and versatile.

8 common LED lighting optical parameters testing techniques 1, photometric determination 2, luminous flux and luminous efficiency detection Luminous flux is the sum of the amount of light emitted by the light source, that is, the amount of luminescence. Test methods are mainly the following two. LED Panel Lights (1) integrated method (2) Spectral method 3.Spectral characteristics detection The spectral characteristics of the test includes spectral power distribution, color coordinates, color temperature, color rendering index and other content. 4, intensity distribution measurement Light intensity with the spatial angle (direction) of the changing relationship is called the pseudo-intensity distribution, the closed curve connected by this distribution is called the light intensity distribution curve. Because there are more measurement points, each point is subject to data processing, generally using automatic distribution photometer for measurement. 5, the effect of temperature on the optical properties of LEDs Temperature has an impact on the optical properties of LEDs. Many experiments have shown that the temperature has an effect on the emission spectrum and color coordinates of LEDs. 6, ground brightness measurement The luminance of a light source in a certain direction is the luminous intensity per unit projection area in that direction, generally using surface luminance meter, aiming luminance meter to measure the surface luminance, there are 2 parts of aiming light path and measuring light path. 7, LED lamp electrical parameters of the measurement LED lamp electrical parameters mainly include positive, negative and negative three electrical parameters, which are related to the normal operation of the LED lamp and are one of the bases for judging the basic performance of the LED lamp. There are two ways to measure the electrical parameters of LED lights: one is a certain current, the second is to measure the voltage parameters; the second is to measure the current parameters when there is a certain voltage. The following measures are taken. (1) forward voltage Apply a positive current to the tested LED lamp, the LED lamp will produce a voltage drop across the ends. By adjusting the current value determined by the power supply, record the corresponding reading on the DC voltmeter, that is, the forward voltage of the LED lamp. According to the relevant common sense, the LED positive conduction when the resistance is small, using the ammeter external method more. (2) reverse current Apply reverse voltage to the test LED lamp, adjust the voltage regulator, the amperometer reading for the reverse current of the LED lamp under test. As the LED reverse conduction resistance is larger, so use the ammeter internal method to measure the forward voltage of the LED. 8, LED lamp thermal characteristics test The thermal characteristics of the light-emitting diode has an important impact on the optical and electrical properties of the LED. Thermal resistance and junction temperature are the main thermal characteristics of LED2. Thermal resistance is the thermal resistance of the PN junction to the surface of the shell, that is, the ratio of the temperature difference on the heat flow channel to the power dissipated on the channel, and junction temperature is the junction temperature of the LED. LED junction temperature and thermal resistance are generally measured by: infrared microimage method, spectroscopy, electrical parameters, photo-thermal resistance, etc. Using infrared temperature microscopy or micro thermocouple, the temperature of the LED chip surface temperature measurement, the accuracy is not enough. The current widely used electrical parameter method is to use the positive voltage drop and PN junction temperature into a linear relationship, using the LEDPN junction forward voltage drop difference to obtain the LED junction temperature.

Why install Flexible LED Strips? 1, auxiliary lighting, increase the indoor environment light, as lighting fill light, the color of the strip and the main indoor light source with each other, can make the home become more bright. As long as you choose the right color of the strip, the home feels more warm. 2, clearly show the outline of space, so that the design is more hierarchical, the installation of the strip light, its own outline can increase the sense of hierarchy of the indoor environment, with a good shape of the strip light, the simple structure of the house will also have a stunning effect, it can be said that the house is a small make-up art! 3, the combination of lights and shelves, practical and good-looking, new room decoration, in addition to the ceiling can be used lights, in fact, the walls of the home, such as some storage on the shelves can be used to create a very textured atmosphere, absolutely high value. In the selection of light strips, to reduce light pollution, try to choose a little less pollution of the cold light source strip. Avoid choosing high-temperature light sources such as spotlights, because high-temperature light sources will heat up after a while, adsorbing dust and even causing the location around the strip to become black, ugly and difficult to clean. Some families may have a study, then you can also install the strip on top of the desk, both to play the role of lighting, no need to place the lamp, but also to make the desktop looks more neat. There is actually a big difference between houses with and without light strips. Nowadays, people's pursuit of beauty is getting higher and higher, so they almost always choose light strips, but one of the problems we need to pay attention to when installing light strips is that they need to be designed well in advance, and they are not installed randomly.

What kinds of flexible circuit boards used in flexible LED strips, and what are the advantages and disadvantages? flexible LED strips, the use of flexible circuit boards, soft and dexterous, folding and bending resistance, flexibility is very high, widely used in the production of linear lighting products such as light strips. The unique characteristics of flexible circuit board make it a rigid circuit board in many occasions, while also promoting the development of many fields. Common types of flexible circuit boards. 1.Single-sided The use of single-sided PI copper sheet in the line is completed, and then covered with a layer of protective film, forming a flexible circuit board with only a single layer of conductors 2.Ordinary double-sided board Using double-sided PI laminate material on both sides of the circuit is completed, both sides are covered with a layer of protective film to form a double-layer conductor circuit board 3.Substrate generation single board Using pure copper foil material in the circuit production, respectively, in the successive two sides of each layer of protective film, to become a single layer of conductors but in both sides of the circuit board have conductors exposed circuit board 4. Substrate generation of double-sided The use of two single-sided PI copper-laminate material is supplemented by a bonding adhesive in the middle of the window at a specific location for lamination, becoming a double-sided conductor circuit board with a lamination in the local area and a separation structure of the two layers in the local area to achieve a circuit board with high flexural properties in the layered area. Flexible circuit boards are mainly of the above four types. The advantages of flexible circuit boards. 1. Free bending, winding, folding, can be arranged according to the space layout requirements at will 2. The use of FPC can greatly reduce the size and weight of electronic products 3. FPC also has good heat dissipation and solderability and easy to install even, the comprehensive cost is low Disadvantages of flexible circuit boards. 1. High one-time initial cost As the flexible PCB circuit board is designed for special applications, circuit design, wiring and photographic backplane required higher costs, unless there is a special need to apply flexible PCB 2. Flexible PCB changes and repair is more difficult Flexible PCB circuit board once made, to change the bottom of the map or the preparation of the light drawing program to start, so it is not easy to change. Its surface is covered with a protective film, to remove before repair, repair and recovery, which is more difficult to work. 3. Size is limited Flexible PCB circuit boards in the case of not yet widespread, usually with intermittent process manufacturing, and therefore subject to the size of the production equipment limitations, can not be made very long, very wide. 4. Improper operation is easy to damage

What are the types of LED line lights LED Linear Light is one of the many LED lights, can emit colorful light, in the form of flowing, often used in urban lighting projects, today I will introduce its types.LED Flood Light Shell type: transparent, translucent, milk white Size type: 30cm, 55cm, 70cm, 85cm, 100cm (length) Control types. 1, monochrome line light: monochrome is only one color, can not change the program. 2, external control line lights: external control requires additional power supply and controller, its program can be written according to user needs, through the controller can adjust the mode of lamp running and speed, is adjustable. 3, internal control line lights: internal control can be directly energized if it is 220V, if it is 24V, it needs to be equipped with an AC24V transformer in order to use it.

What are the benefits of LED Down Light? LED Down LightThe light source of energy-saving lamps, halogen lamps, etc., and now the commonly used light source is LED. LED light source has different classifications. Commonly, DIP LED, also known as plug-in LED, or called straw hat LED. SMD type [Surface Mounted Devices] originally refers to a form of packaging, used in the LED industry refers to SMD lamp beads, High power LED that is high-power LED, there is COB that is concentrated package of LED and so on. The earliest LED downlight useful straw hat LED, now basically do not use. 1w or 3w high power led alone for downlight has become less and less. Now most of the use of SMD and COB. SMD light uniformity, long life, relatively simple process, cost-effective. COB has good color difference and good heat dissipation. Both LED light source has its own advantages. Relatively speaking, COB cost a little more. LED Down LightIn addition to the advantages of general LED lighting, such as energy saving, environmental protection, long life, etc., but also has some other advantages, such as: directional lighting, accent lighting. In the main lighting, LED downlights play the role of auxiliary lighting, such as sofas installed downlights, conducive to reading books and newspapers on the sofa, open the downlight, you can see more clearly. No main lighting will be used in a large number of downlights, so that in addition to meeting the basic lighting needs, but also allows the light to be more layered.

What is LED panel light? LED panel light overview LED panel light is a high-grade indoor lighting fixture, whose outer frame is made of aluminum alloy by anodic oxidation, and the light source is LED, the whole lighting design is beautiful and simple, atmospheric and luxurious, both good lighting effect and can bring people a feeling of beauty. LED panel light design is unique, light through the high light transmission rate of the light guide plate to form a uniform plane luminous effect, good uniformity of illumination, soft light, comfortable and not lose bright, can effectively relieve eye fatigue. From the green lighting design considerations, LED panel light material environmental protection, power consumption is small, luminous efficiency, lighting brightness and other aspects are better than the grille lamp, truly daytime appreciation of light, night lighting. It is gradually replacing the grille lamp with T8 fluorescent lamp as the light source, the life of LED panel light is 10 times that of fluorescent lamp. LED panel lights are installed in various forms, easy to install. LED Linear Light 1.Can be set on the surface of ceiling, wall and installation body. 2.Can be suspended from the ceiling or below the mounting body. When set on the white ceiling, the whole ceiling is in one color, very beautiful, neat and coordinated. LED panel light adopts wide frequency voltage design (AC100-240V/50-60Hz), which can be used in all countries in the world; High power LED adopts isolated power supply, constant current or constant voltage drive, high power efficiency, no pollution to the power grid, stable performance, safe and reliable. LED panel light accessories. The role of LED panel light accessories. 1, to avoid huge development investment, save product development time, early launch of products to occupy the market. 2, simplify procurement difficulties, reduce product procurement costs, reduce material waste, and accelerate procurement speed. 3.Quickly expand the product range and form a complete product series. LED panel light application scope : LED panel lights are widely used, and now there is a trend to replace grille lights; LED panel lights are mainly used in. 1, ceiling (instead of the original grille lights). 2, walls (not only as lighting purposes, but also has the artistic embodiment) 3, installation body (the pursuit of practical and artistic combination, easy and simple installation). 4, other (also available in other places, such as inside the car, counter, etc.).

LED panel light is a high-grade indoor lighting fixture, its outer frame is made of aluminum alloy by anodic oxidation, the light source is LED, the whole lamp design is beautiful and simple, atmospheric luxury, both good lighting effect, but also can bring people the feeling of beauty. LED panel light design is unique, light through the high light transmission rate of the light guide plate to form a uniform plane luminous effect, good uniformity of illumination, soft light, comfortable and not lose bright, can effectively relieve eye fatigue. LED panel light can also be anti-radiation, will not stimulate the skin of pregnant women, the elderly, children.

LED Panel Lights is the shape of the square aluminum basket, and then paste four groups of LED light board + light guide plate + EV cotton + cover plate, made into a square lamp (generally replace the barrier lamp with), the size is generally 30X30, 60X60, small and 15X15, when the drive external light is a luminous surface, so it is called panel light. LED Panel Lights is with the development of LED, on the basis of the original LED backlight derived, the basic principle is to LED electric light source or line light source into a surface light source, so also known as LED panel light, because of its bright throughout, uniform and soft light, no glare, exquisite structure, so that the product is launched, become recognized by the market. The structure of the flat panel lamp mainly includes: aluminum frame, light diffuser plate, light guide plate, reflective paper, of which the light diffuser plate, light guide plate is the core of the flat panel lamp 1.LED Panel Lights is a high-grade indoor lighting fixture, its outer frame is made of aluminum alloy anodized, the light source is LED, the entire lamp design is beautiful and simple, atmospheric luxury, both good lighting effect, but also to bring people a sense of beauty. 2.LED Panel Lights design is unique, the light through the high transmittance of the light guide plate to form a uniform plane luminous effect, good illumination uniformity, soft light, comfortable without losing brightness, can effectively alleviate eye fatigue. 3.LED Panel Lights can also prevent radiation and will not irritate the skin of pregnant women, the elderly and children.

LED panel lights and other lighting have been popular in China in recent years, and are favored and praised by consumers. Juli Lighting believes that this is because its cost performance is very high and its practicability is very strong. In addition to the main advantages of energy saving and environmental protection, its products Thin and light appearance, good luminous performance, long life, it has been accepted by the market. But there will be progress when there is development. For LED panel lights to become mainstream lighting fixtures, there are still some areas that need to be improved. In order to improve reliability, prolong product life, and meet relevant domestic and foreign standards, some improvements can be made to LED panel light products. In terms of heat dissipation, the traditional way is to add heat sinks. But the optimized LED panel light is realized with the help of conical shape design. First, because the cone can form a variety of "ventilation ducts", which help the bulb transfer heat and achieve heat dissipation. Secondly, the reasonable selection of components and the elimination of unqualified or early failure products through tests will also help improve product reliability. Meier Lighting believes that, in addition, reasonable process improvements can also help to improve the service life of products. Simply put, it is to reduce the stress on the device through a standardized and reasonable process, so as to strengthen the product performance and improve the durability of the LED panel light. For the enterprise itself, in order to improve reliability, prolong product life, and meet relevant domestic and foreign standards, some improvements can be made to LED panel lights. For example, reducing the temperature of the product in use can have an immediate effect on improving the reliability of the product and prolonging the service life of the product. In general, improving product reliability can effectively improve the grade of LED panel lights, generate higher cost performance, and create more economic benefits for enterprises. At the same time, fair and reliable certification of these products will increase the credibility of enterprises and help them enter the European and American markets more smoothly.

The applicability of LED downlights to various places is very common. It is not only used in tooling, but now it is gradually used in home decoration. Zhongshan has been focusing on commercial lighting, LED downlights, and LED spotlights. The industry has rich experience, of course, LED downlights The lamp is easy to install, has a variety of styles, and has many universals: In recent years, more and more offices and even homes are using LED downlights. Because the applicability of LED downlights for indoor lighting is more and more known and more and more popular. LED downlights have the applicability of indoor lighting that some other lamps and lanterns can't even match. LED downlights do not occupy indoor space, and LED downlights are installed indoors. Because of the privacy of the lamps, it will not cause a feeling of oppression, on the contrary, it will produce a warm effect. Therefore, home improvement can choose to install multiple downlights to reduce the sense of space oppression. Generally, LED downlights are used more in hotels, homes, cafes, and shopping malls. Downlights are generally used for indoor lighting in shopping malls, offices, factories, hospitals, etc., and they are simple and convenient to install and are loved by people. LED downlights inherit all the advantages of traditional downlights, with low heat generation, long power saving life and minimal maintenance costs. The early LED downlights were not accepted by customers due to the high overall cost of LED lamp beads. With the reduction of the price of LED downlight chips and the improvement of heat dissipation technology, a solid foundation has been laid for LED downlights to enter the commercial field. There are 3 directly-operated branches under the scale line, the company has invested 5 million yuan, and has an industrial chain of 100 employees. From design drawings and mold development, die-casting production of lamp housings, mechanized processing, grinding and polishing, drilling and tapping, powder spraying surface treatment, A complete set of service processes for warehouse product assembly and shipment. The lighting products produced are widely used in hotel commercial lighting, office commercial lighting, traffic track lighting, catering commercial lighting, shop commercial lighting and various industries.

The LED panel light is a high-end indoor lighting fixture. Its outer frame is made of aluminum alloy by anodizing, and the light source is LED. It mainly has the following characteristics: 1. High illumination. The LED panel light adopts a reflective panel with uniform light emission and a sealed design, with a high-efficiency light guide plate, and is made of aluminum alloy materials. The luminous effect is uniform and the illumination is higher. 2. Color temperature is adjustable. The LED panel light can adjust the light color according to different needs and environmental changes, not only does not produce radiation and glare, but also protects eyesight, and the light color is milder. 3. Less fever. The LED panel light has a light and thin appearance, complete heat dissipation function, low power and less heat. 4. Long life. The theoretical life of LED is as long as 100,000 hours. If calculated according to 8 hours per day, its theoretical life is more than 27 years, and the theoretical life of CPL lamp cup is even more than 100,000 hours. 5. Low power consumption. LED panel light lighting technology is a green lighting technology, the product contains no mercury, less waste, and almost no pollution in the manufacturing process; semiconductor lighting is recyclable and recyclable, and plays an important role in the sustainable development of the economy and society. In short, LED panel lights have many advantages and characteristics, and the application range is also very wide. If you need it, you can choose it with confidence.

Introduction and function of LED panel lights LED panel light is a solid-state semiconductor device that can convert electrical energy into visible light, which can directly convert electricity into light. The heart of the LED is a semiconductor chip, one end of the chip is attached to a bracket, one end is the negative electrode, and the other end is connected to the positive electrode of the power supply, so that the entire chip is encapsulated by epoxy resin. The semiconductor wafer consists of two parts, one part is a P-type semiconductor, in which holes dominate, and the other end is an N-type semiconductor, where electrons are mainly. But when the two semiconductors are connected, a P-N junction is formed between them. When the current acts on the wafer through the wire, the electrons will be pushed to the P region, where the electrons and holes recombine, and then emit energy in the form of photons, which is the principle of LED light. Causes of damage to LED panel lights 1. The voltage of the current is unstable, and the rise of the power supply voltage is particularly likely to cause the destruction of the LED lamp. There are many reasons for the sudden rise of the voltage, the quality of the power supply, or the improper use of the user, etc., which may cause the power supply voltage of the power supply to suddenly rise. high. 2. It is also possible that the LED is damaged due to its own quality and thus forms a short circuit, and its original voltage drop is transferred to other LEDs. 3. The power supply path of the lamp is partially short-circuited, which is usually caused by a component in the line, or a short-circuit of other wires, which increases the voltage in this place. 4. It is also possible that water has entered the lamp, because water is conductive, which will short-circuit the circuit of the lamp. 5. The heat dissipation effect of the lamp is not good. We all know that the light of the lamp is a process of heat dissipation. If the temperature in the lamp is too high, it is easy to deteriorate the characteristics of the LED. This is also easy to cause damage to the LED lights. 6. The anti-static work is not done well during assembly, so that the interior of the LED has been damaged by static electricity. Although normal voltage and current values are applied, it is very easy to cause damage to the LED. Cleaning and maintenance of LED panel lights First of all, to prevent electrical shock, to prevent transient overcurrent. Generally, electrical shocks are caused by extremely large transient overcurrents, and the direct consequence is to damage other parts close to the welding line, such as sealing materials. Secondly, do a good job in the heat dissipation system. Nowadays, the related technology of LED heat dissipation system in China is not very mature, and excessive heat will directly cause damage to the internal components of the LED lighting, which will lead to the failure of the LED lighting.