Top Lighting International (HK) Co., Limited

Top Lighting International (HK) Co., Limited

Frequently asked questions about the installation of high bay lights

2022 04/29

With the continuous application of high bay lights, people are now more aware of this product, and more and more manufacturers are gradually adopting this type of lighting fixtures. At the same time, we need to pay attention to the common problems of installing high bay lights. , to avoid accidents.
1. The installation staff must be reliable and skilled electricians, so as to prevent some unnecessary mistakes.
2. Before installation, check whether the high bay light is damaged and whether the spare parts are available.
3. In the case of being fixed, the temperature electrode connection line of the high bay lamp should be fixed with a cable clip, which can also ensure the stability and firmness of the lighting.
4. In the case of installation, be sure to ensure sufficient spacing with flammable materials, and ensure that the installed ceiling has a 2 cm spacing.
5. To ensure that the cable has sufficient length and does not need to be supported. To prevent excessive tensile force, the line must not be tied.
Installation process of LED high bay light (hoisting):
1. In the part where the high bay light must be installed, set the lifting hook in advance. ----Energy-saving high bay light manufacturers

High-power industrial and mining lights must pay special attention to the application of lifting hooks and hook supporting facilities. In addition, when installing lifting hooks, ensure that the bearing capacity exceeds 30Kg.
2. Insert the hook on the LED high bay light into the set lifting hook, and lift the lighting fixture according to the hook;
3. Then connect the power supply from the spot to the power plug of the lighting fixture, connect it according to the wiring standard of the lighting fixture, and do a good job of waterproofing and insulating layers;
4. After connecting to the power supply of the host, observe whether the LED high bay light is working normally. After confirming that the light is on correctly, the installation is over.