Led lights are widely used in daily life. In fact, the LED light is an energy-saving light tube, which is a secondary tube. The basic structure of the led light is a piece of electroluminescent semiconductor material, which is placed on a leaded shelf and sealed with epoxy resin around it, which has the function of protecting its inner core wire.
Smart Wizard describes the assembly of Led panel lights
LED lights have the characteristics of energy saving, environmental protection, long life, convenient control, colorful colors and flexible application. There are two main installation methods, which can be mounted on the ceiling or suspended on the top of the wall or the surface of the installation body.
Assembling process:
1. Put the heads of the four screw rods in the holes of the back cover of the lamp body;
2. Slide the four screws to the small hole and make sure that its swash plate is stuck in the cover;
3. Align the holes of the power supply structure with the four screws. If they are not aligned, they can be moved slightly;
4. Tighten the nut and the screw to fix the power supply and the panel light box;
5. Connect the bolt-type structure of the power output end with the bolt-type card position inside the box, so that they can be inserted together, and cannot be forcibly inserted in the opposite direction.
6. Insert the lamp body into the ceiling, connect the power supply to the plug, turn on the switch, and the panel light is turned on.
It should be noted that the panel light should be designed to be about the same size as the ceiling; and when embedded, it cannot be placed obliquely to avoid slipping. Because each construction method is different, it is necessary to focus on checking whether the weight that the ceiling can bear and the area to be embedded match, otherwise, the panel light must be reinforced and hung well.
For the application of led lamps, it must be assembled well, and the perfect assembly is very important for the next use. When purchasing LED lamps, you should also choose a reliable manufacturer. Shenzhen Qiaoling Lighting Co., Ltd. was established in 2008. Professional focus on LED strip and LED panel products.
How to assemble LED Panel Lights
2022 07/19